North West Custom Parts v2.0 - Specialists is Customising your Firearms

For all enquiries : 0161 408 1155
Home Terms Contact Us

follow nwcp at http://twitter.com

Spike's Tactical Straight Pull LE Model .223 Carbine

Spike's Tactical Straight Pull LE Model .223 Upper

Spike's Tactical Side Cocking Carbine .223

Extended M4 Feedramps
16" Bead Blasted, 1:9 Twist, Match Grade LW-50 Barrel
Polygon Rifled .223 Wylde Chambered Barrel, M4 Barrel Extension
1/2x28 Muzzle Threading
F-marked A2 Front Sight Base
Spike's Tactical Mil-spec M16 Bolt Carrier Group
Forged Mil-spec Charging Handle
Laser Engraved T-Markings
Mil-spec Dry film Lube inside Upper Receiver
Mid Length Handguards, Triangle End Cap
A2 Flash Hider
Spikes Tactical M4 mispec lower

Further details on this model to follow shortly.

Side cocking conversion (pictured above to the right) can be done for £165.00 on any of our straight pull rifles/carbines. We can also do the conversion on any other gun supplying the Low Pro receiver and reproofing at £295.00.

£1,095.00
w/ carry handle £1,150.00
side cocker £1,250.00
side cocker and carry handle £1,300.00

Spike's Tactical Straight Pull BAR Model .223 Upper with Magpul

Extended M4 Feedramps
16" Bead Blasted, 1:9 Twist, Match Grade LW-50 Barrel
Polygon Rifled .223 Wylde Chambered Barrel, M4 Barrel Extension
1/2x28 Muzzle Threading
F-marked A2 Front Sight Base
Spike's Tactical Mil-spec M16 Bolt Carrier Group
Forged Mil-spec Charging Handle
Laser Engraved T-Markings
Mil-spec Dry film Lube inside Upper Receiver
Mid Length Handguards, Triangle End Cap
A2 Flash Hider
Spikes Tactical M4 mispec lower

Details to follow shortly.

£TBC

Spike's Tactical Straight Pull SAR Model .223 Upper with Custom Magpul

Spike's Tactical Straight Pull LE Model .223 Upper with Custom Magpul

Extended M4 Feedramps
16" Bead Blasted, 1:9 Twist, Match Grade LW-50 Barrel
Polygon Rifled .223 Wylde Chambered Barrel, M4 Barrel Extension
1/2x28 Muzzle Threading
F-marked A2 Front Sight Base
Spike's Tactical Mil-spec M16 Bolt Carrier Group
Forged Mil-spec Charging Handle
Laser Engraved T-Markings
Mil-spec Dry film Lube inside Upper Receiver
Mid Length Handguards, Triangle End Cap
A2 Flash Hider
Spikes Tactical M4 mispec lower

Details to follow shortly.

£TBC

Got Billet ?

We've just got the latest, absolute top quality items direct from Spikes Tactical in the USA. Constructed from single billets of aluminium, you really have to see these babies to appreciate the finish. Price to be confirmed shortly.

Lower Specs/Features

Machined from 7075 billet with Type III hardcoat annodized finish
Integrated winter style trigger guard free of any sharp edges
Ambi bolt release, The Ambi bolt release and bolt catch are installed
Flared magwell
Textured on the front of the magwell
Low shelf for RDIAS
Captured buffer retaining pin and rear takedown pin (no more calls for spares)
Set screw for adjustable trigger reset
Set screw for upper to lower tension (how sweet is that?)
Bolt catch and bolt release are retained with a threaded pin rather than a roll pin
Lower can be assembled with out a hammer and punch (amazing huh?)

The Bio-Hazard Billet lower comes with the following items already installed

Bolt catch
Bolt catch spring
Bolt catch plunger
Ambi cross pin
Ambi bolt release
Buffer retaining pin
Buffer retaining pin spring
Buffer retaining pin screw
Threaded pin for bolt catch
Threaded pin for ambi bolt release
Set screw for adjustable trigger reset
Nylon tip set screw for upper to lower tension
(2) short set screws to lock adjustable trigger reset set screw and upper to lower tension set screw in place
4-40 set screw to capture rear pivot pin spring and detent (spring will need to be shortened)

Upper Spec / Features

Machined from 7075 billet with Type III hardcoat annodized finish
M4 feedramps
Beefy design which is stiffer allowing less flex
Front of receiver is machined to accept most after market rail systems (yes, we play nice with everyone else)
Comes with the forward assist and ejection port door installed
Forward assist is retained with a threaded pin (included)
Flared side walls to eliminate accidental bolt release
Machined with Clearance to allow use of a BAD lever or other aftermarket bolt catch
The most beautiful lines you'll see on anything other than your wife!

If you want to have your rifle built with a billet set, please add an extra £375.00. If you want a billet set on it's own they are £550.00 for the set with charging handle and lower parts kit fitted, but no bolt.

Spike's Tactical AR-15 M4 Straight Pull ST LW .223 Upper

Extended M4 Feedramps
16" Bead Blasted, 1:9 Twist, Match Grade LW-50 Barrel
Polygon Rifled .223 Wylde Chambered Barrel, M4 Barrel Extension
1/2x28 Muzzle Threading
F-marked A2 Front Sight Base
Spike's Tactical Mil-spec M16 Bolt Carrier Group
Forged Mil-spec Charging Handle
Laser Engraved T-Markings
Mil-spec Dry film Lube inside Upper Receiver
Mid Length Handguards, Triangle End Cap
A2 Flash Hider

The Spike's Tactical LW Upper utilizes a Lothar Walther LW-50 Stainless barrel with a matte bead blasted finish and M4 barrel extension for increased accuracy and consistency. Due in stock very soon.

£795.00
side cocker £950.00