|
|
| La Rue Tactical Handguard |
|---|
|
|
|
- Available from 7" to 13.2"
- Integral QD sling-swivel sockets
|
The two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the
competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked
closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral
QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, thr Free-float
Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area.
Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part
of pre-mature bolt failures.
|
|
| 7" £314.00 |
| 9" £345.00 |
| 10" £355.00 |
| 11" £363.00 |
| 12" £370.00 |
| 13.2" £400.00 |
|
|
|
| Apex Machining GatorGrip |
|---|
|
Quite possibly the best forend grip you have never heard of, we're very exciting to bring these
into the UK. Available in several lengths, more details to follow shortly.
|
| |
|
| Troy Industries BattleRail Alpha |
|---|
|
|
|
- Comes with three small detachable rails and all mounting hardware
- Built-in spring loaded front folding M4 style Battlesight
- Machined from 6061-T6 hardened aircraft aluminum and finished in MIL-SPEC Type III Hard Coat Anodizing
- Works with standard AR15/M16 barrel nut
- Includes Troy barrel nut
|
The genesis of modular free float rails has arrived. Building off of the TRXTM Extreme design
that revolutionized rail based handguards; the Alpha RailTM utilizes a new low-profile locking
mechanism, which offers unparalleled strength and stability. With built-in legendary TroyTM
spring loaded front Battlesight, unlimited mounting options, and greater heat dispersion the
Alpha RailTM once again sets a new industry standard in modular free float rail design.
|
| |
|
| Troy Industries BattleRail TRX Extreme |
|---|
|
|
|
- Rotary locking system
- Proprietary patent pending one-piece design
- Continuous, uninterrupted top railv
- Reduced heat transfer
- Significant weight reduction
- True U.S. Military Specification M1913 rails
- Increases target acquisition speed
- Free floating design enhances accuracy
- TRX Extreme includes set of one 4" and two 2" quick-attach rails for accessories
- Includes Troy barrel nut
|
TROY TRX (Troy Receiver Extension) Extreme BattleRails are a One-Piece Free Floating Rail, designed for
secure installation. Troy TRX Extreme BattleRails are custom manufactured from aircraft aluminum and
finished in MIL-SPEC Type III hard coat with Teflon. Available in Flat Black and USSOCOM Flat Dark Earth
colors. Several legnths available.
The lightest-strongest-sleekest, free-floating rail available
|
| |
|
| Troy Industries BattleRail TRX Standard |
|---|
TROY TRX (Troy Receiver Extension) Standard BattleRails are a One-Piece Free Floating Rail, designed for
secure installation. Troy TRX Standard BattleRails are custom manufactured from aircraft aluminum and
finished in MIL-SPEC Type III hard coat with Teflon. Available in Flat Black and USSOCOM Flat Dark Earth
colors. Several legnths available.
The lightest-strongest-sleekest, free-floating rail available
|
| |
|
| Troy Industries VTAC Rail TRX Extreme |
|---|
|
The TRX Extreme is the lightest, strongest and sleekest free-floating rail available. Shooters will
appreciate improved shooting ergonomics, reduced heat transfer and quicker target acquisition with
this free-floating rail. The TRX is custom-machined from aircraft aluminum and finished in Mil-Spec
Type III hard coat anodize with Teflon. Several lengths available.
|
| |
|
| Spike's Tactical SAR Rail System |
|---|
|
|
|
- One-piece rail body
- Lightweight titanium barrel nut
- Friction clamp mounting system
- Integrated anti-rotation
- Scalloped rails
- (4) QD sling attachment points
|
Built to the high standards you would expect from Spike's Tactical, these one piece free float rail
systems are available in 7", 9", 10", 12" and 13.2" versions. Includes a QD Sling Swivel, Torx wrenches
and installation instructions. Due in stock very shortly.
- Width: 2.05"
- Height: 2.41"
- Inside Diameter: 1.50"
- Length: Available in 7", 9", 12", 13.2" (10" model coming soon)
- Weight: (including all hardware)
- 7" - 8.51oz
- 9" - 9.31oz
- 10" - 10.69oz
- 12" - 12.26oz
- 13.2" - 12.51oz
|
|
7" £270.00
9" £285.00
10" £295.00
12" £305.00
13" £315.00
|
|
|
| Spike's Tactical BAR Rail System |
|---|
|
|
|
- One piece free float design
- Machined from 6061-T6 Aluminum, barrel nut is Machined from 7075-T6 Aluminum
- Engraved with Spike's Tactical logo
- Scalloped rails (Gentle on your hands without using rail covers)
- 5 Built in QD sockets (Sling attachment points)
- Continuous top rail
|
Built to the high standards you would expect from Spike's Tactical, these one piece free float rail
systems are available in 7", 9" and 12" versions.
|
|
7" £225.00
9" £240.00
12" £250.00
|
|
|
| FAB Defense FG-3 M4 Polymer 3 Rail Handguard |
|---|
|
|
|
- Enables three picatinny rails
- State of the art ergonomic design
- Durable, hardwearing & lightweight construction
- Quick & easy installation, no gun smithing required
- Improves thermal insulation
- Constructed from reinforced polymer composite
|
|
| |
|
| FAB Defense VFR AR15/M16 Rail System |
|---|
|
|
|
- 6061 T6 Aluminum, 1913 mil spec, hard coat anodized
- Easy to mount, requiring no gunsmith
|
This new design allows the user to modify the system to his best battle stance. Optimization can be achieved because the rails are not an integral part of the system. Rails are bolted in the foregrip and seated in specially designed cone shaped recesses, allowing them to be fitted at any or all of six positions around the foregrip, spaced 45 degrees apart. There is no need to connect all four rails but just the ones that are needed on the desired side and selected angle, making it slimmer and more comfortable to hold.
While secured, the rails are "rock solid", due to the special mounting design. The system is two pieces of lightweight forearm that are locked against each other and clamp the barrel nut. This style of assembly is best for bipods, grips, and flashlights, etc. heavy optics and aiming sights require an upper rail to be mounted, which attaches the forearm to the upper receiver and provides two locking points, barrel nut and upper receiver.
|
| |
|
| FAB Defense NFR M4 Aluminum Quad Rail |
|---|
|
|
|
- Carbine length M4 replacement forend rail system
- System adds four mil-spec Picatinny rails for versatile accessory applications
- Precision machined from 6061 T6 billet Aluminum for Maximum strength
- Fully rugged construction will not bend or deform under any condition
- Field tested under extreme conditions for maximum performance and durability
|
|
| 7" £150.00
9" £175.00
12" £195.00 |
|
|
| FAB Defense RC Full Picatinny Rail Covers |
|---|
|
|
|
- Tough, polymer cover slides over Picatinny rails
- Protect shooter's hand from sharp edges of unused rails and heat emitted by the barrel
- Shield exposed rails from damage and makes rail less likely to snag clothing and equipment
- Helps maintain better weapon control
|
Pre-segmented construction for ease in cutting to length to custom fit. Multiple sections can be mounted one after the other for smooth, visually continuous cover on longer handguards
|
| |
|
| Yankee Hill Smooth Carbine Forearm |
|---|
|
|
|
- Free floating
- Full length top rail
- Three 2.5" rails at the end of the forearm to allow the mounting of lights, lasers, and other accessories
- Uses anti-rotation screws to ensure the forearm stays solid, even under severe use
|
|
| |
|
| Yankee Hill Smooth Rifle Forearm |
|---|
|
|
|
- Free floating
- Full length top rail
- Three 2.5" rails at the end of the forearm to allow the mounting of lights, lasers, and other accessories
- Uses anti-rotation screws to ensure the forearm stays solid, even under severe use
|
|
| |
|
| Yankee Hill Light Weight Free Float 4 Rail Forearms |
|---|
|
|
|
- Uses anti-rotation screws to ensure the forearm stays solid, even under severe use
- Mil. Spec. Picatinny rails
- The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs
- The jam nut is made from quality steel and phosphate coated
- Comes in 5 lengths: Mini, Carbine, Mid-Length, Specter and Rifle
|
|
| |
|
| Yankee Hill Four Rail Free Float Forearms |
|---|
|
|
|
- Uses anti-rotation screws to ensure the forearm stays solid, even under severe use
- Mil. Spec. Picatinny rails
- The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs
- The jam nut is made from quality steel and phosphate coated
- Comes in 5 lengths: Mini, Carbine, Mid-Length, Specter and Rifle
|
|
| |
|
| Yankee Hill Customizable Free Float Forearm System |
|---|
|
|
|
- Each forearm comes with a full length picatinny rail and a 3" elevated rail
- Slotted heat vents
- Each tube is drilled and tapped at 45 degree angles to accept our custom rails at 8 different positions
- Comes in 3 lengths: Carbine, Specter and Rifle
|
|
| |
|
| Hogue AR15/M-16 Forend |
|---|
|
|
|
- Free floating rubber OverMolded Aluminum forend tube
- Two piece design installs easily on the AR
- Rifle or Carbine Lengths
|
OverMolding gives a super comfortable, non-slip grasping area that insulates your hand from the heat produced during rapid fire
|
| |
|
| Hogue Pistol Grip and Forend Kit |
|---|
|
|
|
- As Forend above, plus Hogue pistol grip
|
|
| |
|
| AR-Stoner Free Float Tube Handguard 4-Rail |
|---|
|
|
|
- Vented, machined aluminum free float tube
- 4 integral Picatinny-style rails
- Rifle or Carbine Lengths
|
|
| |
|
| Model 1 Handguard |
|---|
|
|
|
- Standard handguard, 2-piece with heatshield
- Rifle or Carbine Lengths
|
|
| |
|
| FAB Defense AG-44-S Quick Release Argonomic Vertical Foregrip |
|---|
|
|
|
- Canted to reduce kick
- The vertical grip is intended to serve as an added comfort-, accuracy-performance-enhancing accessory for any firearm fitted with a standard (underside) Picatinny rail
- User installed, no modification or gunsmithing required
- Comes with Allen (hex) wrench
- Available in different camouflage colors: black, desert tan, olive drab green, alpine white; and in training colors: red and blue
|
|
| |
|
| FAB Defense TAL-4 Firearm Tactical Vertical Grip |
|---|
|
|
|
- No slip design, double side Pressure switch housing
- Internal waterproof battery compartment
- Quick release mechanism or a secure bolt locking system
- Durable, hardwearing & lightweight polymer construction
- User installed, no modification or gunsmith required
- Available in different camouflage colors
|
Performance-enhancing accessory for any firearm fitted with a standard (underside) picatinny rail
|
| |
|
| FAB Defense 7 Pos. Tactical Folding Foregrip |
|---|
|
|
|
- Quickly Transforms From a Horizontal Grip to a Vertical Grip
- Enables 7 different positions of the grip for tactical shooting
- Enables slip on and side mounting of the grip on the picatinny rail
- Heavy Duty Polymer Construction
- Huge storage compartment
- Available In Different Camouflage Colors: Black, Desert Tan, and Olive Drab Green.
|
State-of-the-art ergonomic design, fits all standard Picatinny rails.
|
| |
|
| FAB Defense FGG-S Tactical Folding Foregrip |
|---|
|
|
|
- Quickly transforms from a horizontal grip to a vertical grip
- Quick attachment/removal mechanism
- State-of-the-art ergonomic design, heavy duty polymer construction
- Fits all standard Picatinny rails, fits most handguns with front Picatinny-type accessory rail
- Specifically designed so it will not interfere with handgun firing when in horizontal position
- Available in different camouflage colors: black, desert tan, olive drab green, alpine white; and in training colors: red and blue
|
|
| |
|
| FAB Defense T-GRIP Integrated Foregrip & Light Holder |
|---|
|
|
|
- Ergonomic designed grip, comfortable and natural to use "fighting stance"
- Designed to hold any 1" diameter flashlight and allow quick and easy operation
- Easy to fit and secured by 2 bolts, fits hand guards equipped with a Weaver or Picatinny rail system
- Molded from reinforced polymer composite
|
Three in one: special handgrip and a flashlight mount with a built in trigger that transforms a tactical light into a Vertical Fore grip Weapon Light. This unique ergonomic fore grip will fit perfectly to your hand while holding in up to 1" diameter tactical light with Tail cap switch and allow trigger activation of the light
|
| |
|
| FAB Defense FFA-T4 Two-position foregrip & Flashlight mount |
|---|
|
|
|
- Designed to hold any 1" diameter flashlight and to allow quick and easy operation
- Easy to fit on a firearm. Secured to an accessory rail by 2 bolts
- Two holes on the sides allow ambidextrous operation of flashlights with side switches
- Fits handguards equipped with a Weaver or Picatinny rail system
- Reinforced polymer composite
|
The grip transforms from vertical to horizontal by the push of a button, and allows you to choose your natural "fighting stance". Flashlight secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargeable flashlights
|
| |
|
| FAB Defense MIKI 1 1/8 Potato Shaped Foregrip |
|---|
|
|
|
- Two-in-one: special handgrip and a flashlight mount
- Designed to hold any 1 1/8" diameter flashlight and to allow quick and easy operation
- Fits handguards equipped with a Weaver or Picatinny rail system, no gunsmithing is required
- Molded from reinforced polymer composite, super lightweight
|
The most ergonomically designed grip ever, featuring the most comfortable and natural to use "fighting stance". This unique item permits several gripping positions, such as forearm, fore grip and many others most important is the way it fits perfectly in your hand. Flashlight secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargeable flashlights.
|
| |
|
| FAB Defense MG-20 Foregrip/Spare Magazine Holder |
|---|
|
|
|
- Unique 2-in-1 tactical device serves as both foregrip and spare magazine holder
- Fits all standard Picatinny rails
- Durable, hardwearing & lightweight polymer construction
- State-of-the-art ergonomic design & easy installation
- Available in different camouflage colors: black, desert tan, olive drab green, alpine white; and in training colors: red and blue
|
Enhances tactical efficiency by accommodating an additional magazine on the gun and facilitating fast magazine changes. Quick-release attachment allows for easy mounting or removal, secure bolt locking system gives option of "permanent" mounting.
|
| |
|
| Magpul Angled Foregrip (AFG) |
|---|
|
|
|
- Polymer three-piece design with an interchangeable finger shelf that allows for a flat
"A1-style" surface or an "A2-style" finger nub
- Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended)
- All mounting hardware included
|
Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account
natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for
more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike
conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more
accurate follow-up shots.
|
| |
|
| Magpul Angled Foregrip 2 (AFG2) |
|---|
|
|
|
- Polymer three-piece design with an interchangeable finger shelf that allows for a flat
"A1-style" surface or an "A2-style" finger nub
- Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended)
- All mounting hardware included
|
Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account
natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for
more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional
vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up
shots.
The AFG2 is a slim line design that is shorter in overall length and width compared to the AFG. Smaller size allows
for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts.
Made in U.S.A.
|
| |
|
|
