When designing our new Lightweight Enhanced (LE™) Castle Nut & End Plate System, we came up with two systems that virtually eliminates the risk of your castle nut ever backing out. With our two lockdown systems (K1 & K2), we’ve engineered a solution to install the castle nut onto the end plate that is not only robust, but also stands true to our brand of innovation and ingenuity. The K1 system features a tapered castle nut that seals itself onto the end plate. This ultra precision snug fit allows the castle nut to seat and seal itself into place without the need of staking the end plate. No ratcheting, no set screws, no backing out and no failures. All of these features at only .59 oz / 16.8 grams!
**No torque wrench required, just tighten about 1/4 turn from hand tight. If using a torque wrench, be sure to only use 15-20 ft lbs – this is much less than your typical castle nut
- Lightweight design at only .55 oz / 16.8 grams total
- Castle nut and end plate are 7075 T6 Aircraft Grade Aluminum
- Quick Detach Socket – 360º rotational locking interface
- No set screws or ratcheting system
- Made in the USA